K222543 is an FDA 510(k) clearance for the AMSCO 600 Steam Sterilizer, V-PRO maX 2 Low Temperature Sterilization System, V-PRO s2 Low Temperature Sterilization System, RAS 12 Rack, RAS 12 Long Rack, RAS Cycle of the AMSCO 7052HP and 7053HP Single Chamber Washer Disinfector. This device is classified as a Washer, Cleaner, Automated, Endoscope (Class II - Special Controls, product code NVE).
Submitted by Steris (Mentor, US). The FDA issued a Cleared decision on August 25, 2022, 3 days after receiving the submission on August 22, 2022.
This device falls under the General Hospital FDA review panel. Regulated under 21 CFR 876.1500. This Automated Device Is Intended To Be Used To Clean Endoscopes. Endoscopes That Are Intended To Be Cleaned By The Automated Cleaner System Should Have Been Pre-cleaned And Tested For Leaks And Lumen Obstructions According To The Instrument Manufacturer's Instructions And Current Professional Practices Prior To Processing In The System. The System Includes A Chemical Dispensing System That Meters Out A Predetermined Volume Of Detergent During The Appropriate Cleaning Cycle. If The Device Is Reusable, Validated Reprocessing Instructions And Reprocessing Validation Data For This Device Type Must Be Included In A 510(k) Submission (82 Fr 26807, Available At Https://www.gpo.gov/fdsys/pkg/fr-2017-06-09/pdf/2017-12007.pdf). The Instrument Is Placed In A Tray With Each Lumen End Positioned In Opposite Sides Of The Tray To Allow Enough Detergent And Rinsing Water Pass Through The Lumens Of The Endoscopes..
| 510(k) Number | K222543 FDA.gov |
| FDA Decision | Cleared Substantially Equivalent - Traditional 510(k) (SESE) |
| Date Received | August 22, 2022 |
| Decision Date | August 25, 2022 |
| Days to Decision | 3 days |
| Submission Type | Special |
| Review Panel | General Hospital (HO) |
| Summary | Summary PDF |
| Product Code | NVE — Washer, Cleaner, Automated, Endoscope |
| Device Class | Class II - Special Controls |
| CFR Regulation | 21 CFR 876.1500 |
| Definition | This Automated Device Is Intended To Be Used To Clean Endoscopes. Endoscopes That Are Intended To Be Cleaned By The Automated Cleaner System Should Have Been Pre-cleaned And Tested For Leaks And Lumen Obstructions According To The Instrument Manufacturer's Instructions And Current Professional Practices Prior To Processing In The System. The System Includes A Chemical Dispensing System That Meters Out A Predetermined Volume Of Detergent During The Appropriate Cleaning Cycle. If The Device Is Reusable, Validated Reprocessing Instructions And Reprocessing Validation Data For This Device Type Must Be Included In A 510(k) Submission (82 Fr 26807, Available At Https://www.gpo.gov/fdsys/pkg/fr-2017-06-09/pdf/2017-12007.pdf). The Instrument Is Placed In A Tray With Each Lumen End Positioned In Opposite Sides Of The Tray To Allow Enough Detergent And Rinsing Water Pass Through The Lumens Of The Endoscopes. |